Submersible hyperbolic mixer consists of drive device and hyperbolic impeller body and installation accessories, in order to meet the user's use under different working conditions, the installation is divided into dry (also known as vertical shaft type) and submersible type. Dry type installation, the drive unit is fixed on the working bridge, and the kinetic energy is transmitted to the impeller parts in the medium through the drive shaft, it is used in the liquid with high solids content, high water temperature and containing abrasive, because the impeller has the function of automatic deflection correction, the operation is smoother and the noise of the reducer is less than 60 decibels. Submersible installation, which can eliminate the bridge, using submersible power, using the self-weight positioning of the equipment, flexible and convenient installation, suitable for deeper water depth, and stable water quality, non-abrasive water, water temperature is not greater than 40 ℃, PH value between 6 ~ 9, its characteristics are no noise, no visual barriers.
Hyperbolic mixer's double curve and smooth surface in the propulsion of the water flow, resistance is less, so the efficiency is also higher. The water flow is stirred by the impeller to form a uniform omnidirectional push flow at the bottom of the pool, making the water flow in a vertical cyclone. At the same time, the liquid also follows the direction of rotation of the impeller to produce cyclonic flow in the container, so that it achieves mixing and stirring effect.
The equipment adopts FRP injection molding process, its surface is smooth, linear and flow pattern is very beautiful, with high strength and corrosion resistance. At the same time, the motor reducer is placed above, no wearing parts underwater, with a long service life, low energy consumption, high efficiency, is a variety of fluid mixing equipment.
Hyperbolic mixer installation notes:
1、The bridge should be corrected level, the half bridge column should be corrected vertical, the ground bolts and connection parts should be strong and reliable.
2、The shock absorbing seat should be placed flat on the bridge and fixed after correcting the level and connecting with the bridge.
3、Install the reducer motor on the shock absorbing seat and connect it with the fixed one.
4、Connect the impeller and the flange of mixing shaft with bolts and fasten them.
5、Put the impeller and the mixing shaft into the pool, connect the mixing shaft with the output shaft of the reducer and fasten it. In the case of water, the shaft and the impeller should be connected into the water first, and then the shaft should be connected with the reducer.
